通用banner
您当前的位置 : 首页 > 常见问题 > 咱们应该对济南挤塑板的相关标准有一定的了解

联系我们 Contact Us

青岛万兴建材有限公司

联系:刘经理

电话:15166607534

手机:15166607534

邮箱:139455562@qq.com

地址:青岛市莱西市姜山工业园昌瑞西路18号

咱们应该对济南挤塑板的相关标准有一定的了解

时间:2022/10/11 9:30:00
来源:http://jn.qdwxjc.com/news876231.html

青岛万兴建材有限公司为您免费提供济南挤塑板,济南聚苯板,济南A级保温板等相关信息发布和资讯展示,敬请关注!

       如今,当人们重建或装修房子时,济南挤塑板已成为不可或缺的建筑材料。挤压板的特点是外表上有均匀平整的硬膜,内部有连续均匀的蜂窝。因此,它不仅能够保温,并且能够避免湿气和声响。但在购买济南挤塑板之前,咱们应该对济南挤塑板的相关标准有一定的了解。咱们应该找出哪些标准的挤塑板适合咱们正在装修的房子,还有哪些标准的挤塑板?   

Nowadays, when people rebuild or decorate their houses, the extruded board has become an indispensable building material. The extruded board is characterized by a uniform and flat hard film on the surface, and a continuous and uniform honeycomb inside. Therefore, it can not only keep heat, but also prevent moisture and sound. But before we buy extruded boards, we should have a certain understanding of the relevant specifications of extruded boards. We should find out which specifications of extruded boards are suitable for the house we are decorating, and what specifications of extruded boards are there?


       1、 尺度

       1.一般情况下,外墙、屋面和室内地板垫均选用挤塑板作为保温板。没有严厉一致的规范,因为咱们将在装置和使用过程中堵截剩余的部分。 2.挤塑板的厚度一般为整数,一般为2 cm、3 cm或5 cm,但也有一半的标准可用,例如2.5 cm、3.5 cm或5.5 cm。

1、 Dimensions

1. Generally, extruded boards are used as thermal insulation boards for exterior walls, roofing and indoor floor mats. There is no rigid and uniform specification, because we will cut off the excess during installation and use.

2. The thickness of the extruded board is usually an integer, 2 cm, 3 cm or 5 cm is common, but half of the specifications are also available, such as 2.5 cm, 3.5 cm or 5.5 cm.

       2、 阻燃剂标准

       依据国家有关文件规定,挤塑板的阻燃等级分为三级,即B1、B2和不含任何阻燃剂的一般挤塑板。判别其是否为B1级阻燃剂的简单方法是取一小块点燃。离开两秒钟后,B1级挤压板能够自行熄灭,B2级挤压板在10秒钟后能够熄灭。

2、 Flame retardant specifications

According to the relevant documents stipulated by the state, the flame retardant grades of extruded boards are divided into three grades, namely B1, B2 and ordinary extruded boards without any flame retardant. A simple way to judge whether it is flame-retardant Grade B1 is to take a small piece and ignite it. After leaving for two seconds, it is the Grade B1 extruded board that can extinguish itself, and the Grade B2 extruded board that can extinguish after 10 seconds.

       3、 色彩标准 挤压板有多种色彩。

       除了原色的白色外,还有鲜黄色、蓝色和粉红色,并添加了色母粒。

3、 Color specifications

There are many kinds of colors of extruded boards. In addition to the white of the primary color, there are bright yellow, blue and pink with color masterbatch added.

济南挤塑板哪家好?济南聚苯板报价是多少?济南A级保温板质量怎么样?青岛万兴建材有限公司专业承接济南挤塑板,电话:15166607534